Run a Replicated Stateful Application

This page shows how to run a replicated stateful application using a StatefulSet controller. The example is a MySQL single-master topology with multiple slaves running asynchronous replication.

Note that this is not a production configuration. In particular, MySQL settings remain on insecure defaults to keep the focus on general patterns for running stateful applications in Kubernetes.

Objectives
Before you begin
Deploy MySQL
Understanding stateful Pod initialization
Sending client traffic
Simulating Pod and Node downtime
Scaling the number of slaves
Cleaning up
What’s next

Objectives

Deploy a replicated MySQL topology with a StatefulSet controller.
Send MySQL client traffic.
Observe resistance to downtime.
Scale the StatefulSet up and down.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using Minikube, or you can use one of these Kubernetes playgrounds:
Katacoda
Play with Kubernetes

To check the version, enter kubectl version.

You need to either have a dynamic PersistentVolume provisioner with a default StorageClass, or statically provision PersistentVolumes yourself to satisfy the PersistentVolumeClaims used here.
This tutorial assumes you are familiar with PersistentVolumes and StatefulSets, as well as other core concepts like Pods, Services, and ConfigMaps.
Some familiarity with MySQL helps, but this tutorial aims to present general patterns that should be useful for other systems.

Deploy MySQL

The example MySQL deployment consists of a ConfigMap, two Services, and a StatefulSet.

ConfigMap

Create the ConfigMap from the following YAML configuration file:

kubectl create -f https://k8s.io/docs/tasks/run-application/mysql-configmap.yaml

`mysql-configmap.yaml`
`apiVersion: v1 kind: ConfigMap metadata: name: mysql labels: app: mysql data: master.cnf: \| # Apply this config only on the master. [mysqld] log-bin slave.cnf: \| # Apply this config only on slaves. [mysqld] super-read-only`

mysql-configmap.yaml Copy mysql-configmap.yaml to clipboard

apiVersion: v1
kind: ConfigMap
metadata:
  name: mysql
  labels:
    app: mysql
data:
  master.cnf: |
    # Apply this config only on the master.
    [mysqld]
    log-bin
  slave.cnf: |
    # Apply this config only on slaves.
    [mysqld]
    super-read-only

This ConfigMap provides my.cnf overrides that let you independently control configuration on the MySQL master and slaves. In this case, you want the master to be able to serve replication logs to slaves and you want slaves to reject any writes that don’t come via replication.

There’s nothing special about the ConfigMap itself that causes different portions to apply to different Pods. Each Pod decides which portion to look at as it’s initializing, based on information provided by the StatefulSet controller.

Services

Create the Services from the following YAML configuration file:

kubectl create -f https://k8s.io/docs/tasks/run-application/mysql-services.yaml

`mysql-services.yaml`
`# Headless service for stable DNS entries of StatefulSet members. apiVersion: v1 kind: Service metadata: name: mysql labels: app: mysql spec: ports: - name: mysql port: 3306 clusterIP: None selector: app: mysql --- # Client service for connecting to any MySQL instance for reads. # For writes, you must instead connect to the master: mysql-0.mysql. apiVersion: v1 kind: Service metadata: name: mysql-read labels: app: mysql spec: ports: - name: mysql port: 3306 selector: app: mysql`

mysql-services.yaml Copy mysql-services.yaml to clipboard

# Headless service for stable DNS entries of StatefulSet members.
apiVersion: v1
kind: Service
metadata:
  name: mysql
  labels:
    app: mysql
spec:
  ports:
  - name: mysql
    port: 3306
  clusterIP: None
  selector:
    app: mysql
---
# Client service for connecting to any MySQL instance for reads.
# For writes, you must instead connect to the master: mysql-0.mysql.
apiVersion: v1
kind: Service
metadata:
  name: mysql-read
  labels:
    app: mysql
spec:
  ports:
  - name: mysql
    port: 3306
  selector:
    app: mysql

The Headless Service provides a home for the DNS entries that the StatefulSet controller creates for each Pod that’s part of the set. Because the Headless Service is named mysql, the Pods are accessible by resolving <pod-name>.mysql from within any other Pod in the same Kubernetes cluster and namespace.

The Client Service, called mysql-read, is a normal Service with its own cluster IP that distributes connections across all MySQL Pods that report being Ready. The set of potential endpoints includes the MySQL master and all slaves.

Note that only read queries can use the load-balanced Client Service. Because there is only one MySQL master, clients should connect directly to the MySQL master Pod (through its DNS entry within the Headless Service) to execute writes.

StatefulSet

Finally, create the StatefulSet from the following YAML configuration file:

kubectl create -f https://k8s.io/docs/tasks/run-application/mysql-statefulset.yaml

`mysql-statefulset.yaml`
apiVersion: apps/v1 kind: StatefulSet metadata: name: mysql spec: selector: matchLabels: app: mysql serviceName: mysql replicas: 3 template: metadata: labels: app: mysql spec: initContainers: - name: init-mysql image: mysql:5.7 command: - bash - "-c" - \| set -ex # Generate mysql server-id from pod ordinal index. [[ `hostname` =~ -([0-9]+)$ ]] \|\| exit 1 ordinal=${BASH_REMATCH[1]} echo [mysqld] > /mnt/conf.d/server-id.cnf # Add an offset to avoid reserved server-id=0 value. echo server-id=$((100 + $ordinal)) >> /mnt/conf.d/server-id.cnf # Copy appropriate conf.d files from config-map to emptyDir. if [[ $ordinal -eq 0 ]]; then cp /mnt/config-map/master.cnf /mnt/conf.d/ else cp /mnt/config-map/slave.cnf /mnt/conf.d/ fi volumeMounts: - name: conf mountPath: /mnt/conf.d - name: config-map mountPath: /mnt/config-map - name: clone-mysql image: gcr.io/google-samples/xtrabackup:1.0 command: - bash - "-c" - \| set -ex # Skip the clone if data already exists. [[ -d /var/lib/mysql/mysql ]] && exit 0 # Skip the clone on master (ordinal index 0). [[ `hostname` =~ -([0-9]+)$ ]] \|\| exit 1 ordinal=${BASH_REMATCH[1]} [[ $ordinal -eq 0 ]] && exit 0 # Clone data from previous peer. ncat --recv-only mysql-$(($ordinal-1)).mysql 3307 \| xbstream -x -C /var/lib/mysql # Prepare the backup. xtrabackup --prepare --target-dir=/var/lib/mysql volumeMounts: - name: data mountPath: /var/lib/mysql subPath: mysql - name: conf mountPath: /etc/mysql/conf.d containers: - name: mysql image: mysql:5.7 env: - name: MYSQL_ALLOW_EMPTY_PASSWORD value: "1" ports: - name: mysql containerPort: 3306 volumeMounts: - name: data mountPath: /var/lib/mysql subPath: mysql - name: conf mountPath: /etc/mysql/conf.d resources: requests: cpu: 500m memory: 1Gi livenessProbe: exec: command: ["mysqladmin", "ping"] initialDelaySeconds: 30 periodSeconds: 10 timeoutSeconds: 5 readinessProbe: exec: # Check we can execute queries over TCP (skip-networking is off). command: ["mysql", "-h", "127.0.0.1", "-e", "SELECT 1"] initialDelaySeconds: 5 periodSeconds: 2 timeoutSeconds: 1 - name: xtrabackup image: gcr.io/google-samples/xtrabackup:1.0 ports: - name: xtrabackup containerPort: 3307 command: - bash - "-c" - \| set -ex cd /var/lib/mysql # Determine binlog position of cloned data, if any. if [[ -f xtrabackup_slave_info ]]; then # XtraBackup already generated a partial "CHANGE MASTER TO" query # because we're cloning from an existing slave. mv xtrabackup_slave_info change_master_to.sql.in # Ignore xtrabackup_binlog_info in this case (it's useless). rm -f xtrabackup_binlog_info elif [[ -f xtrabackup_binlog_info ]]; then # We're cloning directly from master. Parse binlog position. [[ `cat xtrabackup_binlog_info` =~ ^(.?)[[:space:]]+(.?)$ ]] \|\| exit 1 rm xtrabackup_binlog_info echo "CHANGE MASTER TO MASTER_LOG_FILE='${BASH_REMATCH[1]}',\ MASTER_LOG_POS=${BASH_REMATCH[2]}" > change_master_to.sql.in fi # Check if we need to complete a clone by starting replication. if [[ -f change_master_to.sql.in ]]; then echo "Waiting for mysqld to be ready (accepting connections)" until mysql -h 127.0.0.1 -e "SELECT 1"; do sleep 1; done echo "Initializing replication from clone position" # In case of container restart, attempt this at-most-once. mv change_master_to.sql.in change_master_to.sql.orig mysql -h 127.0.0.1 <<EOF $(<change_master_to.sql.orig), MASTER_HOST='mysql-0.mysql', MASTER_USER='root', MASTER_PASSWORD='', MASTER_CONNECT_RETRY=10; START SLAVE; EOF fi # Start a server to send backups when requested by peers. exec ncat --listen --keep-open --send-only --max-conns=1 3307 -c \ "xtrabackup --backup --slave-info --stream=xbstream --host=127.0.0.1 --user=root" volumeMounts: - name: data mountPath: /var/lib/mysql subPath: mysql - name: conf mountPath: /etc/mysql/conf.d resources: requests: cpu: 100m memory: 100Mi volumes: - name: conf emptyDir: {} - name: config-map configMap: name: mysql volumeClaimTemplates: - metadata: name: data spec: accessModes: ["ReadWriteOnce"] resources: requests: storage: 10Gi

mysql-statefulset.yaml Copy mysql-statefulset.yaml to clipboard

apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: mysql
spec:
  selector:
    matchLabels:
      app: mysql
  serviceName: mysql
  replicas: 3
  template:
    metadata:
      labels:
        app: mysql
    spec:
      initContainers:
      - name: init-mysql
        image: mysql:5.7
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Generate mysql server-id from pod ordinal index.
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          echo [mysqld] > /mnt/conf.d/server-id.cnf
          # Add an offset to avoid reserved server-id=0 value.
          echo server-id=$((100 + $ordinal)) >> /mnt/conf.d/server-id.cnf
          # Copy appropriate conf.d files from config-map to emptyDir.
          if [[ $ordinal -eq 0 ]]; then
            cp /mnt/config-map/master.cnf /mnt/conf.d/
          else
            cp /mnt/config-map/slave.cnf /mnt/conf.d/
          fi
        volumeMounts:
        - name: conf
          mountPath: /mnt/conf.d
        - name: config-map
          mountPath: /mnt/config-map
      - name: clone-mysql
        image: gcr.io/google-samples/xtrabackup:1.0
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Skip the clone if data already exists.
          [[ -d /var/lib/mysql/mysql ]] && exit 0
          # Skip the clone on master (ordinal index 0).
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          [[ $ordinal -eq 0 ]] && exit 0
          # Clone data from previous peer.
          ncat --recv-only mysql-$(($ordinal-1)).mysql 3307 | xbstream -x -C /var/lib/mysql
          # Prepare the backup.
          xtrabackup --prepare --target-dir=/var/lib/mysql
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
      containers:
      - name: mysql
        image: mysql:5.7
        env:
        - name: MYSQL_ALLOW_EMPTY_PASSWORD
          value: "1"
        ports:
        - name: mysql
          containerPort: 3306
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 500m
            memory: 1Gi
        livenessProbe:
          exec:
            command: ["mysqladmin", "ping"]
          initialDelaySeconds: 30
          periodSeconds: 10
          timeoutSeconds: 5
        readinessProbe:
          exec:
            # Check we can execute queries over TCP (skip-networking is off).
            command: ["mysql", "-h", "127.0.0.1", "-e", "SELECT 1"]
          initialDelaySeconds: 5
          periodSeconds: 2
          timeoutSeconds: 1
      - name: xtrabackup
        image: gcr.io/google-samples/xtrabackup:1.0
        ports:
        - name: xtrabackup
          containerPort: 3307
        command:
        - bash
        - "-c"
        - |
          set -ex
          cd /var/lib/mysql

          # Determine binlog position of cloned data, if any.
          if [[ -f xtrabackup_slave_info ]]; then
            # XtraBackup already generated a partial "CHANGE MASTER TO" query
            # because we're cloning from an existing slave.
            mv xtrabackup_slave_info change_master_to.sql.in
            # Ignore xtrabackup_binlog_info in this case (it's useless).
            rm -f xtrabackup_binlog_info
          elif [[ -f xtrabackup_binlog_info ]]; then
            # We're cloning directly from master. Parse binlog position.
            [[ `cat xtrabackup_binlog_info` =~ ^(.*?)[[:space:]]+(.*?)$ ]] || exit 1
            rm xtrabackup_binlog_info
            echo "CHANGE MASTER TO MASTER_LOG_FILE='${BASH_REMATCH[1]}',\
                  MASTER_LOG_POS=${BASH_REMATCH[2]}" > change_master_to.sql.in
          fi

          # Check if we need to complete a clone by starting replication.
          if [[ -f change_master_to.sql.in ]]; then
            echo "Waiting for mysqld to be ready (accepting connections)"
            until mysql -h 127.0.0.1 -e "SELECT 1"; do sleep 1; done

            echo "Initializing replication from clone position"
            # In case of container restart, attempt this at-most-once.
            mv change_master_to.sql.in change_master_to.sql.orig
            mysql -h 127.0.0.1 <<EOF
          $(<change_master_to.sql.orig),
            MASTER_HOST='mysql-0.mysql',
            MASTER_USER='root',
            MASTER_PASSWORD='',
            MASTER_CONNECT_RETRY=10;
          START SLAVE;
          EOF
          fi

          # Start a server to send backups when requested by peers.
          exec ncat --listen --keep-open --send-only --max-conns=1 3307 -c \
            "xtrabackup --backup --slave-info --stream=xbstream --host=127.0.0.1 --user=root"
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 100m
            memory: 100Mi
      volumes:
      - name: conf
        emptyDir: {}
      - name: config-map
        configMap:
          name: mysql
  volumeClaimTemplates:
  - metadata:
      name: data
    spec:
      accessModes: ["ReadWriteOnce"]
      resources:
        requests:
          storage: 10Gi

You can watch the startup progress by running:

kubectl get pods -l app=mysql --watch

After a while, you should see all 3 Pods become Running:

NAME      READY     STATUS    RESTARTS   AGE
mysql-0   2/2       Running   0          2m
mysql-1   2/2       Running   0          1m
mysql-2   2/2       Running   0          1m

Press Ctrl+C to cancel the watch. If you don’t see any progress, make sure you have a dynamic PersistentVolume provisioner enabled as mentioned in the prerequisites.

This manifest uses a variety of techniques for managing stateful Pods as part of a StatefulSet. The next section highlights some of these techniques to explain what happens as the StatefulSet creates Pods.

Understanding stateful Pod initialization

The StatefulSet controller starts Pods one at a time, in order by their ordinal index. It waits until each Pod reports being Ready before starting the next one.

In addition, the controller assigns each Pod a unique, stable name of the form <statefulset-name>-<ordinal-index>. In this case, that results in Pods named mysql-0, mysql-1, and mysql-2.

The Pod template in the above StatefulSet manifest takes advantage of these properties to perform orderly startup of MySQL replication.

Generating configuration

Before starting any of the containers in the Pod spec, the Pod first runs any Init Containers in the order defined.

The first Init Container, named init-mysql, generates special MySQL config files based on the ordinal index.

The script determines its own ordinal index by extracting it from the end of the Pod name, which is returned by the hostname command. Then it saves the ordinal (with a numeric offset to avoid reserved values) into a file called server-id.cnf in the MySQL conf.d directory. This translates the unique, stable identity provided by the StatefulSet controller into the domain of MySQL server IDs, which require the same properties.

The script in the init-mysql container also applies either master.cnf or slave.cnf from the ConfigMap by copying the contents into conf.d. Because the example topology consists of a single MySQL master and any number of slaves, the script simply assigns ordinal 0 to be the master, and everyone else to be slaves. Combined with the StatefulSet controller’s deployment order guarantee, this ensures the MySQL master is Ready before creating slaves, so they can begin replicating.

Cloning existing data

In general, when a new Pod joins the set as a slave, it must assume the MySQL master might already have data on it. It also must assume that the replication logs might not go all the way back to the beginning of time. These conservative assumptions are the key to allow a running StatefulSet to scale up and down over time, rather than being fixed at its initial size.

The second Init Container, named clone-mysql, performs a clone operation on a slave Pod the first time it starts up on an empty PersistentVolume. That means it copies all existing data from another running Pod, so its local state is consistent enough to begin replicating from the master.

MySQL itself does not provide a mechanism to do this, so the example uses a popular open-source tool called Percona XtraBackup. During the clone, the source MySQL server might suffer reduced performance. To minimize impact on the MySQL master, the script instructs each Pod to clone from the Pod whose ordinal index is one lower. This works because the StatefulSet controller always ensures Pod N is Ready before starting Pod N+1.

Starting replication

After the Init Containers complete successfully, the regular containers run. The MySQL Pods consist of a mysql container that runs the actual mysqld server, and an xtrabackup container that acts as a sidecar.

The xtrabackup sidecar looks at the cloned data files and determines if it’s necessary to initialize MySQL replication on the slave. If so, it waits for mysqld to be ready and then executes the CHANGE MASTER TO and START SLAVE commands with replication parameters extracted from the XtraBackup clone files.

Once a slave begins replication, it remembers its MySQL master and reconnects automatically if the server restarts or the connection dies. Also, because slaves look for the master at its stable DNS name (mysql-0.mysql), they automatically find the master even if it gets a new Pod IP due to being rescheduled.

Lastly, after starting replication, the xtrabackup container listens for connections from other Pods requesting a data clone. This server remains up indefinitely in case the StatefulSet scales up, or in case the next Pod loses its PersistentVolumeClaim and needs to redo the clone.

Sending client traffic

You can send test queries to the MySQL master (hostname mysql-0.mysql) by running a temporary container with the mysql:5.7 image and running the mysql client binary.

kubectl run mysql-client --image=mysql:5.7 -i --rm --restart=Never --\
  mysql -h mysql-0.mysql <<EOF
CREATE DATABASE test;
CREATE TABLE test.messages (message VARCHAR(250));
INSERT INTO test.messages VALUES ('hello');
EOF

Use the hostname mysql-read to send test queries to any server that reports being Ready:

kubectl run mysql-client --image=mysql:5.7 -i -t --rm --restart=Never --\
  mysql -h mysql-read -e "SELECT * FROM test.messages"

You should get output like this:

Waiting for pod default/mysql-client to be running, status is Pending, pod ready: false
+---------+
| message |
+---------+
| hello   |
+---------+
pod "mysql-client" deleted

To demonstrate that the mysql-read Service distributes connections across servers, you can run SELECT @@server_id in a loop:

kubectl run mysql-client-loop --image=mysql:5.7 -i -t --rm --restart=Never --\
  bash -ic "while sleep 1; do mysql -h mysql-read -e 'SELECT @@server_id,NOW()'; done"

You should see the reported @@server_id change randomly, because a different endpoint might be selected upon each connection attempt:

+-------------+---------------------+
| @@server_id | NOW()               |
+-------------+---------------------+
|         100 | 2006-01-02 15:04:05 |
+-------------+---------------------+
+-------------+---------------------+
| @@server_id | NOW()               |
+-------------+---------------------+
|         102 | 2006-01-02 15:04:06 |
+-------------+---------------------+
+-------------+---------------------+
| @@server_id | NOW()               |
+-------------+---------------------+
|         101 | 2006-01-02 15:04:07 |
+-------------+---------------------+

You can press Ctrl+C when you want to stop the loop, but it’s useful to keep it running in another window so you can see the effects of the following steps.

Simulating Pod and Node downtime

To demonstrate the increased availability of reading from the pool of slaves instead of a single server, keep the SELECT @@server_id loop from above running while you force a Pod out of the Ready state.

Break the Readiness Probe

The readiness probe for the mysql container runs the command mysql -h 127.0.0.1 -e 'SELECT 1' to make sure the server is up and able to execute queries.

One way to force this readiness probe to fail is to break that command:

kubectl exec mysql-2 -c mysql -- mv /usr/bin/mysql /usr/bin/mysql.off

This reaches into the actual container’s filesystem for Pod mysql-2 and renames the mysql command so the readiness probe can’t find it. After a few seconds, the Pod should report one of its containers as not Ready, which you can check by running:

kubectl get pod mysql-2

Look for 1/2 in the READY column:

NAME      READY     STATUS    RESTARTS   AGE
mysql-2   1/2       Running   0          3m

At this point, you should see your SELECT @@server_id loop continue to run, although it never reports 102 anymore. Recall that the init-mysql script defined server-id as 100 + $ordinal, so server ID 102 corresponds to Pod mysql-2.

Now repair the Pod and it should reappear in the loop output after a few seconds:

kubectl exec mysql-2 -c mysql -- mv /usr/bin/mysql.off /usr/bin/mysql

Delete Pods

The StatefulSet also recreates Pods if they’re deleted, similar to what a ReplicaSet does for stateless Pods.

kubectl delete pod mysql-2

The StatefulSet controller notices that no mysql-2 Pod exists anymore, and creates a new one with the same name and linked to the same PersistentVolumeClaim. You should see server ID 102 disappear from the loop output for a while and then return on its own.

Drain a Node

If your Kubernetes cluster has multiple Nodes, you can simulate Node downtime (such as when Nodes are upgraded) by issuing a drain.

First determine which Node one of the MySQL Pods is on:

kubectl get pod mysql-2 -o wide

The Node name should show up in the last column:

NAME      READY     STATUS    RESTARTS   AGE       IP            NODE
mysql-2   2/2       Running   0          15m       10.244.5.27   kubernetes-minion-group-9l2t

Then drain the Node by running the following command, which cordons it so no new Pods may schedule there, and then evicts any existing Pods. Replace <node-name> with the name of the Node you found in the last step.

This might impact other applications on the Node, so it’s best to only do this in a test cluster.

kubectl drain <node-name> --force --delete-local-data --ignore-daemonsets

Now you can watch as the Pod reschedules on a different Node:

kubectl get pod mysql-2 -o wide --watch

It should look something like this:

NAME      READY   STATUS          RESTARTS   AGE       IP            NODE
mysql-2   2/2     Terminating     0          15m       10.244.1.56   kubernetes-minion-group-9l2t
[...]
mysql-2   0/2     Pending         0          0s        <none>        kubernetes-minion-group-fjlm
mysql-2   0/2     Init:0/2        0          0s        <none>        kubernetes-minion-group-fjlm
mysql-2   0/2     Init:1/2        0          20s       10.244.5.32   kubernetes-minion-group-fjlm
mysql-2   0/2     PodInitializing 0          21s       10.244.5.32   kubernetes-minion-group-fjlm
mysql-2   1/2     Running         0          22s       10.244.5.32   kubernetes-minion-group-fjlm
mysql-2   2/2     Running         0          30s       10.244.5.32   kubernetes-minion-group-fjlm

And again, you should see server ID 102 disappear from the SELECT @@server_id loop output for a while and then return.

Now uncordon the Node to return it to a normal state:

kubectl uncordon <node-name>

Scaling the number of slaves

With MySQL replication, you can scale your read query capacity by adding slaves. With StatefulSet, you can do this with a single command:

kubectl scale statefulset mysql  --replicas=5

Watch the new Pods come up by running:

kubectl get pods -l app=mysql --watch

Once they’re up, you should see server IDs 103 and 104 start appearing in the SELECT @@server_id loop output.

You can also verify that these new servers have the data you added before they existed:

kubectl run mysql-client --image=mysql:5.7 -i -t --rm --restart=Never --\
  mysql -h mysql-3.mysql -e "SELECT * FROM test.messages"

Waiting for pod default/mysql-client to be running, status is Pending, pod ready: false
+---------+
| message |
+---------+
| hello   |
+---------+
pod "mysql-client" deleted

Scaling back down is also seamless:

kubectl scale statefulset mysql --replicas=3

Note, however, that while scaling up creates new PersistentVolumeClaims automatically, scaling down does not automatically delete these PVCs. This gives you the choice to keep those initialized PVCs around to make scaling back up quicker, or to extract data before deleting them.

You can see this by running:

kubectl get pvc -l app=mysql

Which shows that all 5 PVCs still exist, despite having scaled the StatefulSet down to 3:

NAME           STATUS    VOLUME                                     CAPACITY   ACCESSMODES   AGE
data-mysql-0   Bound     pvc-8acbf5dc-b103-11e6-93fa-42010a800002   10Gi       RWO           20m
data-mysql-1   Bound     pvc-8ad39820-b103-11e6-93fa-42010a800002   10Gi       RWO           20m
data-mysql-2   Bound     pvc-8ad69a6d-b103-11e6-93fa-42010a800002   10Gi       RWO           20m
data-mysql-3   Bound     pvc-50043c45-b1c5-11e6-93fa-42010a800002   10Gi       RWO           2m
data-mysql-4   Bound     pvc-500a9957-b1c5-11e6-93fa-42010a800002   10Gi       RWO           2m

If you don’t intend to reuse the extra PVCs, you can delete them:

kubectl delete pvc data-mysql-3
kubectl delete pvc data-mysql-4

Cleaning up

Cancel the SELECT @@server_id loop by pressing Ctrl+C in its terminal, or running the following from another terminal:
```
kubectl delete pod mysql-client-loop --now
```
Delete the StatefulSet. This also begins terminating the Pods.
```
kubectl delete statefulset mysql
```
Verify that the Pods disappear. They might take some time to finish terminating.
```
kubectl get pods -l app=mysql
```
You’ll know the Pods have terminated when the above returns:
```
No resources found.
```
Delete the ConfigMap, Services, and PersistentVolumeClaims.
```
kubectl delete configmap,service,pvc -l app=mysql
```
If you manually provisioned PersistentVolumes, you also need to manually delete them, as well as release the underlying resources. If you used a dynamic provisioner, it automatically deletes the PersistentVolumes when it sees that you deleted the PersistentVolumeClaims. Some dynamic provisioners (such as those for EBS and PD) also release the underlying resources upon deleting the PersistentVolumes.

What’s next

Look in the Helm Charts repository for other stateful application examples.

Create an Issue Edit this Page

Tasks

Step-by-step instructions for performing operations with Kubernetes.